Roche Diagnostics
Urisys 1100® · ≥5.7 · Operator's Manual · 9.0
28 5. Installation
5.1 Operator ID
The Urisys 1100
®
software allows the
activation/deactivation of the operator identification code,
containing up to 12 alphanumeric characters. The
Operator ID and Authentication mode can be activated in
Setup 3.
Normal If the instrument is set to normal measuring mode, the
operator ID is asked upon every restart of the system and
coming out from sleep mode. This operator ID can
contain up to 12 alphanumeric characters and will be
printed out together with the test results and will be sent
to the host.
5.2 Authentication
It is possible to download up to 300 operator IDs with
corresponding passwords (up to 12 alphanumeric
characters) from the host PC via the ASTM protocol.
Device can be used only by an operator with ID and
password in the downloaded list. Entry of incorrect
operator ID and passwords causes a lock out. This
prevents access of the analyzer by unauthorised users.
Operators having supervisor rights (maximum 2) have
access to all results, may send the analyzer log file to the
host or print the last 10 actions of the log file and may
deactivate the authentication mode.
ATTENTION:
Please ensure that you have a barcode reader
and/or an AT/PC keyboard prior to activation, as
you will need one for this function.
ATTENTION:
If the maximum length of identification is exceeded
the input cursor will skip to the first character and
the identification will be overwritten.
To Next Page
Loading...
Need help?
General
