Rockwell Automation Allen-Bradley PowerFlex 700S - Page 129

Rockwell Automation Publication 20D-PM001D-EN-P - March 2019 129
Programming and Parameters Chapter 2
1168 MC TP3 Select
Enter a value to select Motor Control (MC) data displayed in Par 1169 [MC TP3 Value]. Par 1168 [MC TP3 Select]
and Par 1169 [MC TP3 Value] are diagnostic tools you can use to view internal drive parameters
Default:
Options:
0 =
0 =
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =
11 =
12 =
VdsError
VdsError
VdsRef
VdsFdbk
SlipGain
SlipGnMaxLim
SlipGnMinLim
SlipGainRtd
MaxSlipGain
MinSlipGain
KpTermSlipRg
IntgtrmSlpRg
P510Bit26
LatchedSlpGn
Y
RW 32-bit
Integer
1169 MC TP3 Value
Displays the data selected by Par 1168 [MC TP3 Select]. This display should only be used if the selected value is
integer data. This parameter is a diagnostic tool you can use to view internal drive parameters
Default:
Min/Max:
0.0
-/+2147483648.0
RO 32-bit
Integer
1170 MC Generic 1
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1171 MC Generic 2
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1172 MC Generic 3
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1173 MC Generic 4
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1174 MC Generic 5
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1175 MC Generic 6
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1176 MC Generic 7
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1177 MC Generic 8
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1178 MC Generic 9
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
1179 MC Generic 10
For Future Use.
Note: This parameter was added for firmware version 4.001.
Default:
Min/Max:
0
+/-32767
RW 16-bit
Integer
No. Name
Description
Values
Linkable Read-Write Data Type