Applications and Operating Modes
R&S
®
FSW
101User Manual 1173.9411.02 ─ 19
For details see the R&S FSW-K10 User Manual.
Remote command:
INST:SEL GSM, see INSTrument[:SELect] on page 686
I/Q Analyzer
The I/Q Analyzer application provides measurement and display functions for I/Q data.
For details see the R&S FSW I/Q Analyzer User Manual.
Remote command:
INST:SEL IQ, see INSTrument[:SELect] on page 686
LTE
The LTE application requires an instrument equipped with the LTE Measurements
option R&S FSW-K10. This application provides LTE measurements.
For details see the R&S FSW-K10x (LTE Downlink) User Manual.
Remote command:
INST:SEL LTE, see INSTrument[:SELect] on page 686
Noise Figure
The Noise Figure application requires an instrument equipped with the Noise Figure
Measurements option R&S FSW-K30. This application provides noise figure measure-
ments.
For details see the R&S FSW-K30 User Manual.
Remote command:
INST:SEL NOISE, see INSTrument[:SELect] on page 686
Phase Noise
The Phase Noise application requires an instrument equipped with the Phase Noise
Measurements option, R&S FSW-K40. This application provides measurements for
phase noise tests.
For details see the R&S FSW-K40 User Manual.
Remote command:
INST:SEL PNOISE, see INSTrument[:SELect] on page 686
Pulse Measurements
The Pulse application requires an instrument equipped with the Pulse Measurements
option, R&S FSW-K6. This application provides measurement functions for pulsed sig-
nals.
For details see the R&S FSW-K6 User Manual.
Remote command:
INST:SEL PULSE, see INSTrument[:SELect] on page 686
Realtime Spectrum
The Realtime Spectrum application requires an instrument equipped with the Realtime
Spectrum option, R&S FSW-K160R. This application provides realtime measurement
functions.
Available Applications
To Next Page
Loading...
