Applications and Operating Modes
R&S
®
FSW
102User Manual 1173.9411.02 ─ 19
For details see the R&S FSW-K160R User Manual.
Remote command:
INST:SEL RTIM, see INSTrument[:SELect] on page 686
TD-SCDMA BTS
The TD-SCDMA BTS application requires an instrument equipped with the TD-SCDMA
Base Station Measurements option, R&S FSW-K76. This application provides test
measurements for TD-SCDMA downlink signals (base station signals) according to the
test specification.
For details see the R&S FSW-K76/-K77 User Manual.
Remote command:
INST:SEL BTDS, see INSTrument[:SELect] on page 686
TD-SCDMA UE
The TD-SCDMA UE application requires an instrument equipped with the TD-SCDMA
User Equipment Measurements option, R&S FSW-K77. This application provides test
measurements for TD-SCDMA uplink signals (mobile signals) according to the test
specification.
For details see the R&S FSW-K76/-K77 User Manual.
Remote command:
INST:SEL MTDS, see INSTrument[:SELect] on page 686
Transient Analysis
The Transient Analysis application requires an instrument equipped with the Transient
Analysis option, R&S FSW-K60. This application provides measurements and evalua-
tions for Transient Analysis.
For details see the R&S FSW-K60 User Manual.
Remote command:
INST:SEL TA, see INSTrument[:SELect] on page 686
Vector Signal Analysis (VSA)
The VSA application requires an instrument equipped with the Vector Signal Analysis
option, R&S FSW-K70. This application provides measurements and evaluations for
Vector Signal Analysis.
For details see the R&S FSW-K70 User Manual.
Remote command:
INST:SEL DDEM, see INSTrument[:SELect] on page 686
WLAN
The WLAN application requires an instrument equipped with the WLAN option,
R&S FSW-K91/91n. This application provides measurements and evaluations accord-
ing to the WLAN IEEE 802.11 standards.
For details see the R&S FSW-K91 User Manual.
Remote command:
INST:SEL WLAN, see INSTrument[:SELect] on page 686
Available Applications
To Next Page
Loading...
