Remote Commands
R&S
®
FSW
1039User Manual 1173.9411.02 ─ 19
Return values:
<Cycles> Number of switching cycles.
Example:
DIAG:INFO:CCO? CAL
Usage: Query only
Manual operation: See "Relay Cycle Counter" on page 590
DIAGnostic:SERVice:BIOSinfo?
This command queries the BIOS version of the CPU board.
Return values:
<BiosInformation> String containing the BIOS version.
Example:
DIAG:SERV:BIOS?
Returns the BIOS version.
Usage: Query only
DIAGnostic:SERVice:HWINfo?
This command queries hardware information.
Return values:
<Hardware> String containing the following information for every hardware
component.
<component>: name of the hardware component
<serial#>: serial number of the component
<order#>: order number of the component
<model>: model of the component
<code>: code of the component
<revision>: revision of the component
Example:
DIAG:SERV:HWIN?
Queries the hardware information.
"FRONTEND|100001/003|1300.3009|03|01|00|00",
"MOTHERBOARD|123456/002|1300.3080|02|00|00|00",
...
Usage: Query only
DIAGnostic:SERVice:VERSinfo?
This command queries information about the hardware and software components.
Return values:
<Information> String containing the version of hardware and software compo-
nents including the types of licenses for installed firmware
options.
Configuring the R&S FSW
To Next Page
Loading...
