Rohde & Schwarz FSW43 - Page 220

Measurements
R&S
®
FSW
220User Manual 1173.9411.02 ─ 19
Band Category............................................................................................................ 220
Base Station Class......................................................................................................220
Base Station Maximum Output Power........................................................................ 221
Bands..........................................................................................................................221
Base Station RF Bandwidth........................................................................................ 221
Carrier Adjacent to RF Bandwidth Edge..................................................................... 221
Power GSM Carrier.....................................................................................................221
Apply to SEM.............................................................................................................. 222
Band Category
Defines the band category for MSR measurements, i.e. the combination of available
carriers to measure.
"BC1"
LTE FDD and W-CDMA
"BC2"
LTE FDD, W-CDMA and GSM/EDGE
"BC3"
LTE TDD and TD-SCDMA
Remote command:
[SENSe:]ESPectrum<sb>:MSR:BCATegory on page 755
Base Station Class
Defines the class of the base station according to its sending range.
This setting is required to calculate the SEM limits according to standard 3GPP 37.141
V12.2.0.
Remote command:
[SENSe:]ESPectrum<sb>:MSR:CLAS on page 756
Spectrum Emission Mask (SEM) Measurement