Common Measurement Settings
R&S
®
FSW
355User Manual 1173.9411.02 ─ 19
Fig. 6-9: Band elimination filter results
3. Shift the reference line from the top of the diagram to the middle of the diagram by
changing the position of the reference point 0.0
dB to 50
%.
In the "Source Calibration" tab, enter "Position": 50
%.
At the same time, the range of the displayed y-axis moves from [-100.0
dB to 0
dB]
to [-50
dB to +50
dB].
Fig. 6-10: Reference line shifted to middle of diagram (50%)
Data Input and Output
To Next Page
Loading...
