Rohde & Schwarz FSW43 - Page 471

Common Analysis and Display Functions
R&S
®
FSW
471User Manual 1173.9411.02 ─ 19
Trace and data export settings can be configured in the "Traces" dialog box ("Trace/
Data Export" tab).
Export all Traces and all Table Results
.......................................................................471
Include Instrument Measurement Settings..................................................................471
Trace to Export............................................................................................................471
Decimal Separator...................................................................................................... 472
Export Trace to ASCII File.......................................................................................... 472
Export all Traces and all Table Results
Selects all displayed traces and result tables (e.g. Result Summary, marker table etc.)
in the current application for export to an ASCII file.
Alternatively, you can select one specific trace only for export (see Trace to Export).
The results are output in the same order as they are displayed on the screen: window
by window, trace by trace, and table row by table row.
Remote command:
FORMat:DEXPort:TRACes on page 1012
Include Instrument Measurement Settings
Includes additional instrument and measurement settings in the header of the export
file for result data.
See chapter 8.4.4, "Reference: ASCII File Export Format", on page 557 for details.
Remote command:
FORMat:DEXPort:HEADer on page 1012
Trace to Export
Defines an individual trace that will be exported to a file.
This setting is not available if Export all Traces and all Table Results is selected.
Trace Configuration