Rohde & Schwarz FSW43 - Page 548

Data Management
R&S
®
FSW
548User Manual 1173.9411.02 ─ 19
For details see chapter 3.1.7, "Protecting Data Using the Secure User Mode",
on page 37.
For details see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S FSW User Manual.
Remote command:
MMEMory:CATalog? on page 992
File Name
Contain the name of the data file without the path or extension.
By default, the name of a settings file consists of a base name followed by an under-
score. Multiple files with the same base name are extended by three numbers, e.g.
limit_lines_005.
For details on the file name and location see chapter 8.3.2.2, "Storage Location and
File Name", on page 546.
Note: Secure user mode. In secure user mode, settings that are to be stored on the
instrument are stored to volatile memory. To store data permanently, select an external
storage location such as a USB memory device.
For details see chapter 3.1.7, "Protecting Data Using the Secure User Mode",
on page 37.
For details see "Protecting Data Using the Secure User Mode" in the "Data Manage-
ment" section of the R&S FSW User Manual.
Comment
An optional description for the data file. A maximum of 60 characters can be displayed.
Remote command:
MMEMory:COMMent on page 993
File Type
Determines whether the global instrument settings with all channels will be stored or
recalled, or the current channel settings only.
Items
Defines which data and settings are stored or will be recalled. Depending on the "File
Type", only channel settings or global settings are available. Which items are available
also depends on the installed options (see also chapter 8.3.2.1, "Stored Data Types",
on page 545).
Remote command:
MMEMory:SELect[:ITEM]:ALL on page 997
MMEMory:SELect[:ITEM]:DEFault on page 998
MMEMory:SELect[:ITEM]:HWSettings on page 998
MMEMory:SELect[:ITEM]:LINes:ALL on page 998
MMEMory:SELect[:ITEM]:NONE on page 999
MMEMory:SELect[:ITEM]:TRACe[:ACTive] on page 999
MMEMory:SELect[:ITEM]:TRANsducer:ALL on page 999
Storing and Recalling Instrument Settings and Measurement Data