Rohde & Schwarz FSW43 - Page 550

Data Management
R&S
®
FSW
550User Manual 1173.9411.02 ─ 19
Startup Recall..............................................................................................................550
Selecting the Storage Location - Drive/ Path/ Files.....................................................550
File Name....................................................................................................................551
Comment.....................................................................................................................551
Cancel.........................................................................................................................551
Startup Recall
Activates or deactivates the startup recall function. If activated, the settings stored in
the selected file are loaded each time the instrument is started or preset. If deactivated,
the default settings are loaded.
Note that only instrument settings files can be selected for the startup recall function,
not channel settings files.
Remote command:
MMEMory:LOAD:AUTO on page 1001
Selecting the Storage Location - Drive/ Path/ Files
Select the storage location of the settings file on the instrument or an external drive.
The "Drive" indicates the internal (C:) or any connected external drives (e.g. a USB
storage device).
The "Path" contains the drive and the complete file path to the currently selected
folder.
The "Files" list contains all subfolders and files of the currently selected path.
Storing and Recalling Instrument Settings and Measurement Data