Rohde & Schwarz FSW43 - Page 588

General Instrument Setup
R&S
®
FSW
588User Manual 1173.9411.02 ─ 19
9.3.5.4 Service Functions
Using service functions
The service functions are not necessary for normal measurement operation. Incorrect
use can affect correct operation and/or data integrity of the R&S FSW.
Therefore, only user accounts with administrator rights can use service functions and
many of the functions can only be used after entering a password. These functions are
described in the instrument service manual.
The service functions are available in the "Service Function" tab of the "Service" dialog
box.
Service Function......................................................................................................... 588
Numeric Mode.............................................................................................................589
Send............................................................................................................................589
Clear History............................................................................................................... 589
Password.................................................................................................................... 589
Clear Results...............................................................................................................589
Save Results...............................................................................................................589
Result List................................................................................................................... 589
Service Function
Selects the service function by its numeric code or textual name.
The selection list includes all functions previously selected (since the last "Clear His-
tory" action).
Remote command:
DIAGnostic:SERVice:SFUNction on page 1043
General Instrument Settings