Rohde & Schwarz FSW43 - Page 656

Network and Remote Operation
R&S
®
FSW
656User Manual 1173.9411.02 ─ 19
Current LXI Configuration........................................................................................... 656
LXI Password..............................................................................................................656
LXI Manufacturer Description......................................................................................657
LAN Reset...................................................................................................................657
Current LXI Configuration
Displays the current LXI information from the R&S FSW (read-only).
"Current ver-
sion"
Current LXI version
"LXI Extended
Features"
Detected LXI features, such as HiSlip (see "HiSLIP Protocol"
on page 612)
"Computer
name"
Name of the R&S FSW as defined in the operating system (see also
"Computer Name" on page 649)
"MAC address"
Media Access Control address (MAC address), a unique identifier for
the network card in the R&S FSW
"IP address"
IP address of the R&S FSW as defined in the operating system (see
also "IP Address" on page 649).
"ICMP"
Indicates whether the ping responder is active or not
"VXI-11 Dis-
covery"
If enabled, connected devices are detected automatically using the
VXI-11 protocol (see "VXI-11 Protocol" on page 612)
Remote command:
SYSTem:LXI:INFo? on page 1037
LXI Password
Password for LAN configuration. The default password is LxiWebIfc.
Remote command:
SYSTem:LXI:PASSword on page 1037
Network and Remote Control Settings