Rohde & Schwarz FSW43 - Page 995

Remote Commands
R&S
®
FSW
995User Manual 1173.9411.02 ─ 19
<NewFileName> String containing the path and name of the target file.
Example:
MMEM:MOVE 'C:\TEST01.CFG','SETUP.CFG'
Renames TEST01.CFG in SETUP.CFG in directory C:\.
Usage: Event
SCPI confirmed
MMEMory:MSIS <Device>
This command selects the default storage device used by all MMEMory commands.
Parameters:
<Device> 'A:' | 'C:' | … | 'Z:'
String containing the device drive name
*RST: 'C:'
Usage: SCPI confirmed
MMEMory:NAME <FileName>
This command creates a new and empty file.
It also sets the file name for screenshots taken with HCOPy[:IMMediate<device>]
on page 1009. Note that you have to route the printer output to a file.
Parameters:
<FileName> String containing the path and name of the target file.
Example:
MMEM:NAME 'C:\R_S\instr\user\PRINT1.BMP'
Selects the file name.
Usage: Event
SCPI confirmed
MMEMory:NETWork:DISConnect <Drive>
This command disconnects a network drive.
Parameters:
<Drive> String containing the drive name.
Usage: Event
MMEMory:NETWork:MAP <Drive>, <HostName> [, <UserName>, <Password>][,
<Reconnect>]
This command maps a drive to a server or server directory of the network.
Note that you have to allow sharing for a server or folder in Microsoft networks first.
Managing Settings and Results