Remote Commands
R&S
®
FSW
996User Manual 1173.9411.02 ─ 19
Parameters:
<Drive> String containing the drive name or path of the directory you
want to map.
<HostName> String containing the host name of the computer or the IP
address and the share name of the drive.
'<\host name or IP address\share name>'
<UserName> String containing a user name in the network.
The user name is optional.
<Password> String containing the password corresponding to the <User-
Name>.
The password is optional.
<Reconnect> ON | OFF
ON
Reconnects at logon with the same user name.
OFF
Does not reconnect at logon.
Usage: Event
MMEMory:NETWork:UNUSeddrives?
This command returns a list of unused network drives.
Return values:
<DriveName> List of network drives in alphabetically descending order, e.g.
'W:,V:,U:,...'
Usage: Query only
MMEMory:NETWork:USEDdrives? <State>
This command returns a list of all network drives in use.
Parameters:
<State> You do not have to use the parameter. If you do not include the
parameter, the command returns a list of all drives in use.
This is the same behavior as if you are using the parameter
OFF.
ON
Returns a list of all drives in use including the folder information.
OFF
Returns al list of all drives in use.
Usage: Query only
MMEMory:RDIRectory <Directory>
This command deletes the indicated directory.
Managing Settings and Results
To Next Page
Loading...
