Rohde & Schwarz R&S TSME6 - Page 32

Getting started
R&S
®
TSME6
32User Manual 4900.0033.02 ─ 08
If the R&S TSME6 is detected by the software for the first time, the software down-
loads the calibration files from the R&S TSME6 to the host PC. This procedure
takes a few minutes.
3. If you have defined the firewall settings not to include the R&S TSME6 applica-
tions, a Windows Security Alert may appear. Change the firewall settings to permit
access to the R&S TSME6 applications:
a) In the Windows Control Panel, select "System and Security > Windows Firewall
> Allow apps to communicate through Windows Defender Firewall".
Figure 3-15: Firewall settings to permit application access
b) Allow one or more specified application modules to communicate on all net-
work types (domain, private, public).
In particular, select:
● "TSME Device Manager" Application
● "tsmeping"
c) Depending on the application used, also select the following items:
● ROMES:
–
ROMES.exe
– Dll Loader for PHYLIS Modules (in the ROMES application
folder)
● R&S NESTOR:
–
RohdeSchwarz.Nestor.exe
–
● R&S ViCom:
DLL Loader for PHYLIS Modules (RuSProcessPhysicalLayer.exe)
Preparing for use