Rohde & Schwarz Scope Rider RTH1004 - 4.2 Top view

Instrument tour
R&S
®
Scope Rider RTH
28Getting Started 1326.1561.02 ─ 10
11 = Acquisition settings
12 = Screenshot and documentation output
13 = Channels and vertical settings
For a description of the keys, see Chapter 5.3.3, "Using front panel keys",
on page 42.
4.2 Top view
The R&S RTH1002 has two BNC input connectors CH1 and CH2, and two 4 mm
banana plug inputs for multimeter measurements.
Figure 4-3: Top view of R&S RTH1002
The R&S RTH1004 has four BNC input connectors CH1, CH2, CH3, CH4.
Figure 4-4: Top view of R&S RTH1004
Top view