Safety and regulatory information
R&S
®
Scope Rider RTH
5Getting Started 1326.1561.02 ─ 10
1 Safety and regulatory information
The product documentation helps you to use the product safely and efficiently.
Where do I find safety information?
Safety information is part of the product documentation. It warns you of potential
dangers and gives instructions on how to prevent personal injury or damage
caused by dangerous situations. Safety information is provided as follows:
●
In Chapter 1.1, "Safety instructions", on page 5. The same information is
provided in many languages in printed format. The printed "Safety Instruc-
tions" for "R&S
®
Scope Rider RTH" are delivered with the product.
●
Throughout the documentation, safety instructions are provided when you
need to take care during setup or operation.
The R&S RTH handheld scope is designed for measurements up to measure-
ment category CAT IV 600 V and CAT III 1000 V.
The product is intended for the development, production and verification of elec-
tronic components and devices in industrial, administrative and laboratory envi-
ronments, and for usage in the field. Use the product only for its designated pur-
pose. Observe the operating conditions and performance limits stated in the
specifications document.
1.1 Safety instructions
Products from the Rohde & Schwarz group of companies are manufactured
according to the highest technical standards. To use the products safely, follow
the instructions provided here and in the product documentation. Keep the prod-
uct documentation nearby and offer it to other users.
Use the product only for its intended use and within its performance limits. Inten-
ded use and limits are described in the product documentation such as the speci-
fications document, manuals and the printed "Safety Instructions" document. If
you are unsure about the appropriate use, contact Rohde & Schwarz customer
support.
Safety instructions
To Next Page
Loading...
