Rohde & Schwarz Scope Rider RTH1004 - 5.5 Selecting the mode; 5.6 Setting the date, time and language

Operating the instrument
R&S
®
Scope Rider RTH
45Getting Started 1326.1561.02 ─ 10
5.5 Selecting the mode
A mode comprises all settings and functions that are needed to perform a mea-
surement task. Selecting the mode is the first setup step.
1. Press the [MODE] key.
2. Select the mode:
● On the touchscreen: Tap the required mode icon.
● Using controls: Turn the wheel until the required mode is marked, and
press the wheel button to select the mode.
5.6 Setting the date, time and language
The instrument has a date and time clock. You can adjust the clock to the local
time, and you can select the display language. Supported languages are listed in
the specifications document. The help is provided in English.
A reboot of the instrument is not necessary.
Setting the date, time and language