Rohde & Schwarz Scope Rider RTH1004 - 5.3 Accessing the functionality; 5.3.1 Using the touchscreen

Operating the instrument
R&S
®
Scope Rider RTH
36Getting Started 1326.1561.02 ─ 10
1. Connect the leads first to the DMM inputs at the top of the instrument, and
then to the DUT.
2. To start meter measurements, press the [DMM] key.
5.3 Accessing the functionality
The complete functionality is available in the menus and dialogs on the touch-
screen. You can touch the functions directly on the display, or you can use the
wheel to navigate and select. In addition, the most important functions are applied
to the keys on the front panel to set up and perform measurement tasks quickly.
5.3.1 Using the touchscreen
Using the touchscreen of the R&S RTH is as easy as using your mobile phone.
To open the menu, tap the "Menu" button - that is the R&S logo in the right bottom
corner of the display.
Figure 5-2: Open the menu and select a menu item
Accessing the functionality