Rohde & Schwarz Scope Rider RTH1004 - 4.4 Left view

Instrument tour
R&S
®
Scope Rider RTH
31Getting Started 1326.1561.02 ─ 10
Probe compensation
Probe compensation terminal to support adjustment of passive probes to the
oscilloscope channel.
Logic probe connector
Input for the logic probe R&S RT-ZL04. Logic analysis requires Mixed Signal
option R&S RTH-B1, which includes the logic probe R&S RT-ZL04.
Risk of electrical shock - no CAT rating for MSO measurements
The logic probe R&S RT-ZL04 is not rated for any measurement category.
To avoid electrical shock or personal injury, and to prevent material dam-
age, make sure that the ground clips of the R&S RT-ZL04 are connected to
protective ground on the DUT.
4.4 Left view
1 = DC input
2 = Kensington lock slot
DC input
Connector for the power adapter to charge the battery.
Kensington lock slot
The Kensington lock is used to secure the instrument against theft.
Left view