Rohde & Schwarz Scope Rider RTH1004 - 5.2 Connecting test leads (R&S RTH1002)

Operating the instrument
R&S
®
Scope Rider RTH
35Getting Started 1326.1561.02 ─ 10
6. Switch off the test circuit.
7. Connect the probe to the DUT.
8. Switch on the test circuit.
5.2 Connecting test leads (R&S RTH1002)
The R&S RTH1002 has an integrated digital multimeter (DMM) and test leads for
multimeter measurements.
Figure 5-1: Meter inputs to connect test leads
Connecting test leads (R&S RTH1002)