Roland DR-880 - Page 102

102
TSC patch editing
Size
1–10 Size of the room being simulated
ER Level
0–100 Volume of the early reflections
Density
0–100 Density of the early reflections
Rel Density
0–100 Density of the late reverberation
Low Damp
0.10–1.00
Attenuation of the late reverbera-
tion’s low-frequency range
L. Damp Freq
55 Hz–4.00 kHz
Frequency at which the low-fre-
quency region of the late reverbera-
tion begins to be attenuated
The late reverberation in the region below the L. Damp
Freq setting will be attenuated.
High Damp
0.10–1.00
Attenuation of the late reverbera-
tion’s high-frequency range
H. Damp Freq
400 Hz–20.0 kHz
Frequency at which the high-fre-
quency region of the late reverbera-
tion begins to be attenuated
The late reverberation in the region above the H. Damp
Freq setting will be attenuated.
Parameter/
Range
Explanation