Roland DR-880 - Initial Setup and Operation; Making Connections

17
Before you begin playing
The DR-880 does not contain an amp or speakers. In order to produce sound, you’ll need to
connect an amp or audio system, or stereo headphones.
Audio cables, MIDI cables, stereo headphones, and foot switches are not included. You can
purchase them separately from your dealer.
fig.002-010
To prevent malfunction and/or damage to speakers or other devices, always turn down
the volume, and turn off the power on all devices before making any connections.
Making connections
Expression pedal
(Roland EV-5)
Stereo headphones
AC adaptor
(BRC-series)
Mixer, Guitar amp, etc.
Guitar
or
Bass
Computer
Audio set
Digital recorder etc.
Monitor speakers
(Powered)
Pad controller
etc.
MIDI sequencer
etc.
Foot switch (FS-6 etc.)