Roland DR-880 - Playing Guitar;Bass with Patterns; Connecting and Playing Guitar;Bass

32
Playing your guitar/bass along with patterns
Here’s how to connect your guitar/bass to the DR-880 and
play along with the patterns.
fig.003-150
1
Connect your guitar/bass to the GUITAR/BASS INPUT
jack. (p. 15)
2
Select a pattern (p. 24), and press [ ] to make the
pattern start playing.
3
Play your guitar/bass.
4
Use the GUITAR/BASS INPUT knob to adjust the
volume of your guitar/bass.
2
4
1
• You can use the DR-880’s Tuner function to tune your
guitar/bass. For details, refer to “Tuning your guitar/
bass” (p. 90).
• You can connect an expression pedal to the rear panel CTL
3, 4/EXP PEDAL jack, and use it to control the volume of
your guitar/bass. For details, refer to “Using an
expression pedal as a volume pedal” (p. 91)