EasyManua.ls Logo

Roland DR-880 - Troubleshooting and Error Handling; Resolving Sound, Playback, and MIDI Issues; Addressing USB and System Errors

Roland DR-880
168 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
147
Appendices
Troubleshooting
Problems with the sound
No sound
Could the MASTER VOLUME be set to the
minimum? (p. 13)
Could the PART LEVEL DRUM knob be set
to the minimum? (p. 13)
Could the PART LEVEL BASS knob be set to
the minimum? (p. 13)
Could you have selected a pattern or song
that contains no performance data?
Could the sound be set for output from the
INDIVIDUAL jacks? (p. 107–p. 111, p. 119)
The volume of the guitar / bass connected
to the GUITAR/BASS INPUT is too low
Could the GUITAR/BASS INPUT knob be
set to the minimum position? (p. 13)
Could you be using a connection cable that
contains a resistor?
Use a connection cable that does not contain
a resistor.
Sound is interrupted
Could you be attempting to play more than
32 notes simultaneously? (The DR-880 is able
to play a maximum of 32 notes
simultaneously.)
Could mute group settings have been made?
(p. 107)
Pressing [ ] does not start playback
Could the Sync Mode be set to “MIDI”?
(p. 128)
Could you have selected a pattern or song
that contains no performance data?
Loop playback doesn’t occur when you
press [LOOP]
Could you be in Pattern mode?
Could the Loop End setting be greater than
the number of measures in the song?
(p. 77, p. 82)
Problems with MIDI
An external MIDI device won’t play the DR-880 /
The DR-880 won’t play an external MIDI device
Could the MIDI channel settings be
incorrect? (p. 126)
Could the note number settings be incorrect?
(p. 127)
Problems with USB
Can’t import SMF data or back up/
recover data
Is the USB cable connected correctly?
Does the operating system of your computer
support the DR-880? (p. 134)
Did you set the USB Mode to “STORAGE,”
switch the DR-880 off, then power it up
again? (p. 134)
Can’t communicate with your computer
via MIDI
Is the USB cable connected correctly?
Does the operating system of your computer
support the DR-880? (p. 134)
Is the driver installed correctly? (p. 143)
Did you set the USB Mode to “MIDI,” switch
the DR-880 off, then power it up again?
(p. 134)

Table of Contents

Related product manuals