80
Copying/Clearing a song
Copying a song
1. In the song edit menu screen, move the
cursor to the “COPY” icon and press
[ENTER].
* If there is an edited song that has not been saved, the
message “Cancel edit?” will appear.
If you want to save the song, press [EXIT] and perform
the Write operation (p. 79). If you don’t want to save it,
press [ENTER].
The song copy screen appears.
fig.03-120d
2. Move the cursor to the copy-source song
number, and use the VALUE dial to select
a song number.
3. Move the cursor to the copy-destination
song number, and use the VALUE dial to
select a user song as the copy
destination.
4. To copy the song, press [ENTER]. If you
decide to cancel, press [EXIT].
The message “Now writing...” will appear,
and the copy will be carried out.
When the copy is completed, the message
will disappear.
* Do not turn off the power while the message is displayed.
Your data may be damaged if you do so.
Clearing (erasing) a song
1. Select the song that you want to clear.
2. Press [EDIT].
The edit menu screen appears.
3. Move the cursor to the “SONG” icon and
press [ENTER].
The song edit menu screen appears.
4. Move the cursor to the “CLEAR” icon and
press [ENTER].
The display will ask “CLEAR SONG?”
fig.03-130d
5. To clear the song, press [ENTER]. If you
decide to cancel, press [EXIT].
The message “Now writing...” will appear,
and the song will be erased.
When the erasure has been completed, the
message will disappear.
* Do not turn off the power while the message is displayed.
Your data may be damaged if you do so.
Copy
source
Copy
destination
To Next Page
Loading...
