31
Playing the patterns
Quick Start
Following preset patches P01–P20 you can also select from
user kits U01–U20.
* If you turn the VALUE dial while holding down [SHIFT], the
patch number will change in steps of ten.
* You can hold down [SHIFT] and press [TSC] to switch between
preset (P) and user (U).
* Each time you press [TSC], the TSC function will turn on
(button lit) or off (button unlit).
• For more details on the TSC, refer to p. 42.
• For more on the Preset patches, refer to p. 155.
• When you want to make changes to the TSC patch
settings, refer to “Chapter 6 Editing the TSC settings”
(p. 99).
To Next Page
Loading...
