Roland Fantom-X6 - Selecting and Playing Sounds; Selecting a Sound (Patch Mode); Adjusting the Keyboard Touch; Shifting the Octave

12
Selecting and playing sounds
1. Press the PATCH button so the following screen appears.
fig.0-01
2. Use the cursor (left/right) buttons to choose the Patch group or Patch number, and use the VALUE
VALUE dial or [DEC][INC] to make a selection.
fig.0-02
You can adjust the way in which the volume responds to your playing dynamics.
→ “Keyboard Sens (Keyboard Sensitivity)” (p. 226) in Owner’s Manual
By pressing [-OCT]/[+OCT] you can shift the pitch over a range of -3 octaves to +3 octaves.
→ “Octave Shift (Oct)” (p. 24) in Owner’s Manual
What’s the procedure for playing in Performance mode ?
→ “Selecting a Performance” (p. 99) in Owner’s Manual
Selecting a sound (Patch Mode)
Adjusting the keyboard touch
Shifting the octave
Fantom-X_HB_e.book 12 ページ ２００５年５月２４日 火曜日 午前１１時１２分