Roland Fantom-X6 - Playing Sampled Sounds

22
Playing sampled sounds
Samples (i.e., sounds you've recorded by sampling) can be selected from the
patch list in the same way as ordinary patches.
fig.0-07.e
1. Sample a sound.
→ “Sampling Procedure” (p. 142) in Owner’s Manual
2. Select a sample from the patch list.
You can play the sample at different pitches in the same way as an ordinary patch.
* You can also specify that the sample be played using a pad.
You can also assign samples so they can be played from the pads.
→ “Assigning Samples to a Pad (Assign To Pad)” (p. 151) in Owner’s Manual
fig.0-07a
Procedure
Sample
Select “USAM” (or “CSAM” if you're using a card).
Select the patch that plays the sound you sampled.
1
2
Fantom-X_HB_e.book 22 ページ ２００５年５月２４日 火曜日 午前１１時１２分