Roland Fantom-X6 - Using the D Beam to Play Sounds; Changing the Sound

41
Using the D Beam to play sounds
You can play a snare shot or other sound when you place your hand over the
D Beam sensor. From the rhythm set being played by the pads, you can
select one sound to be played by the D Beam. This is called the pad trigger
function.
To activate the pad trigger function, press [PAD TRIGGER] so the indicator is lit.
The sound will play when you place your hand over the D Beam sensor.
fig.2-01
1. Select a rhythm set for the pads, and notice which pad is assigned to the sound you want to play from the
D Beam.
2. Hold down [SHIFT] and press [PAD TRIGGER]. The setting screen will appear.
3. Change the “PAD Number” to the pad you noted in step 1.
fig.2-01a
For more details
→ “Pad Trigger(Pad-related settings)” (p. 122) in Owner’s Manual
Using pad trigger
Changing the sound
Fantom-X_HB_e.book 41 ページ ２００５年５月２４日 火曜日 午前１１時１２分