Roland Fantom-X6 - Using the Internal Sounds to Record Bass and Chords; Selecting a Sound and Making Adjustments; Real-Time Recording from the Keyboard

71
Using the internal sounds to record bass and chords
Next, select part 1 and choose the sound you want to use for recording. You might want to adjust the
volume balance relative to the drums, or make adjustments to the effects.
fig.3-09.e
Now we’re going to use the keyboard to record additional parts while listening to the drums you
recorded in the preceding section. Press [REC] to get the recording standby screen. Press [PLAY] to begin
recording.
fig.3-10
→ “Using the Mixer Screen” (p. 103) in Owner’s Manual
→ “Recording Your Performance as You Play It (Realtime Recording)” (p. 170) in
Owner’s Manual
→ “Viewing the data within a track” (p. 178) in Owner’s Manual
If you want to record without playing the drum sounds → “Silencing the Playback of a Specific Part
(Mute)” (p. 105)
Selecting a sound and making adjustments
Real-time recording from the keyboard
and use the VALUE dial to select a patch.Use the cursor (left/right)
to select a part...
Fantom-X_HB_e.book 71 ページ ２００５年５月２４日 火曜日 午前１１時１２分