Roland Fantom-X6 - Creating a CD; Sample Your Completed Song to a Stereo Audio File; Exporting the Audio File to Your Computer

81
Creating a CD
You can export your song in the form of audio data from the Fantom-X to your computer, either via USB
cable or by saving the Fantom-X data to CompactFlash media.
Then by using the CD-R writing functionality of your computer, you can burn this data to an audio CD.
As you’ve seen, the Fantom-X provides all of the necessary functionality for creating an entire song; you
can then export the completed data to your computer and create an original CD.
The playback of the audio tracks and MIDI tracks can be combined into a single audio track for the region
you specify. A sample that you create in this way can be saved on your computer as the audio data for the
entire song.
→ “Combining the contetns of the tracks into one audio track (Mixdown)” (p. 19) in
Guide to the Added Functionality
fig.3-20.e
To export the audio file to your computer, you can either use a USB cable to connect the Fantom-X to your
computer, or transfer the data via PC card.
→ “Transferring Files to or from Your Computer (Storage Mode)” (p. 219) in Owner’s
Manual (Using USB)
→ “Using a Memory Card” (p. 248) in Owner’s Manual (Using a PC card)
→ “File-Related Functions (File Utility)” (p. 223) in Owner’s Manual (Using a file)
fig.3-21.e
Sample your completed song to a stereo audio file
Exporting the audio file to your computer
Audio File
With the Audio Track Edit screen displayed,
hold down [SHIFT] and press [F1 (Mixdown)].
Audio File
Fantom-X_HB_e.book 81 ページ ２００５年５月２４日 火曜日 午前１１時１２分