9
The basics of using the Fantom-X live
Once you’ve created an original patch, you’ll need to save it as a user patch if
you want to use it again. This is called the “WRITE” operation. The
illustration below shows the WRITE procedure.
If you select another patch without writing your edited patch, your edits will
be lost.
* User patches and user performances have “USER” displayed in front of their name; e.g., “USER: 002 Concert
Piano.” These let you store your own original sounds.
fig.0-000c.e
Saving the settings you create
Select the save destination.
Assigning a Patch or Performance name.
The Write Menu screen will appear.
Fantom-X_HB_e.book 9 ページ ２００５年５月２４日 火曜日 午前１１時１２分
To Next Page
Loading...
