Roland Fantom-X6 - Main Features; Cutting-edge sound engine that unifies audio and MIDI; Top-class 128-voice polyphony; Large, color LCD-first ever on a synthesizer!

15
Playing two or more sounds simultaneously (Layers)
1. Change the sound selected for part 1 so that it plays “PR-F:009 UltimatGrand.”
In the Performance Layer screen, press [F3 (Key Range)]. The screen lets you specify the key range of each
part.
Adjust the balance as desired. For example, you might want the piano to be heard as the main component
of the sound, with the bell lightly added to it.
Select Patches
Specify the Key ranges in which the bell will sound
Adjusting the volume balance of the piano and bell
Use [F1]/[F2] to select “AC.Piano,” and then use
the VALUE dial to select “PR-F: 009 UltimaGrand.”
After making your selection, press [F8 (Select)] to finalize it.
Use cursor (up/down) to select part 1,
and press [F1 (Patch List)]...
Use cursor (up/down) to
select part 2.
Specify the key range in which the selected part will sound.
Move the cursor to “Lower” (or “Upper”) and use VALUE dial to set the value,
then press “Set Lower” (or “Set Upper”).
1 2
Use [CURSOR] (left/right) to select a part, use [CURSOR] (up/down) to select “LEVEL,”
and then use the VALUE dial to adjust the volume.
Part 1: piano volume
Part 2: bell volume
Fantom-X_HB_e.book 15 ページ ２００５年５月２４日 火曜日 午前１１時１２分