Roland Fantom-X6 - What Are Input Effects; Using the Effect Switch

47
Using effects
Input effects are effects designed especially for use on sound that’s being input from AUDIO INPUT or
DIGITAL IN. The Fantom-X provides six effects that are convenient when you’re capturing sound as
samples.
fig.
Hold down [SHIFT] and press [MIX IN] to access the Input Setting screen.
Press [F7 (In FX Sw)] in this screen to turn on the input effect.
Press [F8 (In FX Setup)] in this screen to access the input effect select screen.
For more about input effects
→ Input Effect Setup Settings (p. 142) in Owner’s Manual
When auditioning an effect, there’s an easy way to switch it on/off without having to raise or lower the
effect level.
fig.2-19
Press [EFFECTS] to access the Routing screen, and then press [F8 (Effect Sw)]. The Effect Sw screen
(shown above) will appear. Here you can press [F1]–[F6] to switch effects on/off.
For more about effect switch
→ “Turning Effects On and Off” (p. 206) in Owner’s Manual
What are input effects?
Using the effect switch
Fantom-X_HB_e.book 47 ページ ２００５年５月２４日 火曜日 午前１１時１２分