67
Getting ready to create a song
At the factory settings, demo song data will be loaded into the Fantom-X each time you switch it on.
Before you create your own song, you’ll need to clear the sequencer memory.
1.
Press [SONG EDIT] to access the Song Play screen, and then press [F4 (Song Utility)].
The Song Utility Menu window will open.
2.
Use or to select “1 Song Clear.”
3.
Press [F8 (Select)] to clear the song.
A message will ask you for confirmation.
4.
Press [F8 (Exec)] to execute.
→
“Erasing the Song/Pattern from Temporary Song (Song Clear)”
(p. 168) in Owner’s
Manual
fig.3-06
Clearing the sequencer
Fantom-X_HB_e.book 67 ページ ２００５年５月２４日 火曜日 午前１１時１２分
To Next Page
Loading...
