77
Using samples in audio tracks
If you're using samples in a song, it's convenient to use the sequencer's audio tracks.
An audio track is a track that's specifically for the purpose of inserting samples. You can edit the structure
of your song while viewing a graphic representation of the data, just as you can for a song track. Audio
tracks can also be played back from the middle of a sample. If the settings described on p. 76 are made for
the sample, it will synchronize to the tempo of the song when it's inserted into an audio track. Even if you
change the tempo of the song later, the sample will play back at that tempo.
In the Song Edit screen, press [F3 (AUDIO TRACK)] to access the AUDIO TRACK screen.
fig.n01
Use the cursor buttons (up/down) to select the desired track.
You can specify the location at which the sample will be
inserted using the following units.
When you've specified the desired location, press [F6 (Insert)].
The sample list will appear.
Select the sample you want to use, and press [F8 (Select)].
The sample will be inserted into the audio track.
For more about audio tracks
“Using audio tracks” (p. 13) in Guide to the Added Functionality
You can also insert a sample directly into an audio track while sampling.
→
“Recording an audio track”
(p. 24) in Guide to the Added Functionality
What is an audio track?
Inserting a sample into an audio track
Location units
Button operations
Measures [BWD]/ [FWD]
16th notes (120 ticks) [VALUE] dial
1 tick [INC]/[DEC]
Fantom-X_HB_e.book 77 ページ ２００５年５月２４日 火曜日 午前１１時１２分
To Next Page
Loading...
