Roland Fantom-X6 - Playing Just One Component of a Patch

59
Playing just one component of a patch
Suppose you have found a favorite patch that combines piano and strings,
and would like to play just the piano component of this patch. In such cases,
you can easily mute just the strings sound.
1. In the Patch screen, select a sound and press [PATCH EDIT].
The PATCH EDIT screen will appear.
2. Press [F8 (Tone Sw/Sel)].
The tone switches will appear for [F1]–[F4].
In this screen, you can press [F1]–[F4] to turn on/off each of the four tones that make up the patch. Turn
on only the sounds that you want to play.
fig.5-98
For more about the Tones that make up each Patch
“Selecting the Tones That Will Sound (Tone On/Off)” (p. 46) in Owner’s Manual
Procedure
Fantom-X_HB_e.book 59 ページ ２００５年５月２４日 火曜日 午前１１時１２分