Roland Fantom-X6 - Using CD-ROM Samples in Your Song; Importing Samples into the Fantom-X from Your Computer Via USB Cable; Importing Data Via PC Card

74
Using CD-ROM samples in your song
If your computer has a USB connector, you can import samples into the Fantom-X.
Refer to the Owner’s Manual for details on the requirements for your computer and the supported
operating systems.
→ “About USB Functions” (p. 218) in Owner’s Manual
fig.3-14.e
If your computer can use PC cards (or has a PC card reader / writer), you can use this method to import
data from CD-ROM into the Fantom-X.
By using a PC card type adaptor, you can also use CompactFlash or SmartMedia as well as
PC card memory devices.
fig.3-15.e
Data you've loaded can be selected from the patch list in the same way as an ordinary
patch.
fig.0-07a
→ “Assigning Samples to a Pad (Assign To Pad)” (p. 151)
Importing samples into the Fantom-X from your
computer via USB cable
Importing data via PC card
USB
PC card
Select “USAM” (or “CSAM” if you're using a card).
Select the patch that plays the sound you sampled.
1
2
Fantom-X_HB_e.book 74 ページ ２００５年５月２４日 火曜日 午前１１時１２分