Roland FR-4X - Page 19

19
Basic Operation of the FR-4x
Using the [
K
][
J
] buttons to move between pages in the main screen
Bass & Chord Mode
Free Bass Mode
Orchestra
Chord part
tone screen
Orchestra Free Bass
part
tone screen
Bass & Chord
Mode
Reed combination
screen
(no change possible)
Free Bass
Mode
Reed combination
screen
(no change possible)
Orchestra
Bass part
tone screen
Main screen
Accordion
part
Reed combination
screen
(no change possible)
Orchestra part
tone screen
NOTE
5 You can only select screens for parts that are turned on.
5 For the orchestra part/organ part/orchestra bass part/orchestra chord part/orchestra free bass part, the sound name briefly appears
in the screen when you access it; then the part name and the register number selected for that part are shown.
5 For the accordion part/bass & chord part/free bass part, the register name and reed combination are shown but cannot be
changed.
5 If the part whose screen is displayed turns off, you’ll return to the main screen.
5 The drum part cannot be selected.
MEMO
5 In some cases, a message (information) is briefly displayed when you use a button to select something or when you turn a knob.
5 The two indicators below the display are lit or unlit to indicate the status as follows.
Indicator Explanation
USER PROGRAM
This is lit when you select user program
mode.
&
“Recalling a User Program” (p. 40)
A:1-7
B:8-14
This indicates whether the right-hand register
buttons are operating as [1]–[7] (unlit) or as
[8]–[14] (lit).
Organ part
tone screen