Roland FR-4X - Simultaneously Editing the Left Hand Accordion Sounds (Basmacro)

90
Menu Options
Parameter Explanation/Value
Value
(if “Type” is selected as NOIS)
TexMex
Trikitixa
F-Jazz
Classic3
Bajan
Value
(if “Type” is selected as N.LV)
It allows you to specify how prominent
the noise should be.
Off, –40–Std–+40
Value
(if “Type” is selected as MUSE)
It allows you to choose the system used
for detuning the 8’ reeds.
Off
Dry
Classic
F-Folk
American_L
American_H
North_Europe
German_L
D-Folk_L
Italian_L
German_H
Alpine
Italian_H
D-Folk_H
French
Scottish
7. Use the [–] [+] buttons to set the “Value.”
8. From the Value screen, press the [
J
] button again.
A confirmation message like the following appears.
9. To save the settings, press the [ENTER/YES] button.
When saving is completed, the screen indicates “Complete.”
If you decide to cancel, press the [EXIT/NO] button.
Simultaneously Editing the Left Hand Accordion Sounds
(BasMacro)
Here’s how to edit the parameters of the left hand bass & chord
part (accordion sounds) of the selected set simultaneously for all
registers.
You can simultaneously edit settings such as the reed noise type
and volume.
1. Select the set for which you want to edit the left
hand bass sounds simultaneously.
For details, refer to “How to Select Sets” (p. 33).
2. Press the [MENU] button.
3. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button (p. 44).
4. Use the [
K
] [
J
] buttons to select “BasMacro,” and
then press the [ENTER/YES] button.
5. Use the [–] [+] buttons to select the type of
parameter that you want to edit in common for
registers 1–7 of the left hand bass & chord part.
Parameter Value
Type
Button Noise Type
Button Noise Level
Reed Growl Noise Type
Reed Growl Noise Level
6. Press the [
J
] button.
The Value screen appears.
The field “Value” changes depending on the “Type” of selected
parameter. See the following table: