40
Working with User Programs
Recalling a User Program
Here is how to select a User Program.
1. Press the [USER PROGRAM] button.
The “USER PROGRAM” indicator below the display is lit.
The display changes, allowing you to recall a user program (User
Program Mode).
Bank Number
If no user program has
been selected since you
turned on the power, the
screen indicates “Select!
UPG.”
Selecting from the same bank
If you’re selecting a user program from the same group as the bank
number of the currently selected user program, you don’t need to
specify the bank number.
2. Press a right hand register button to select a user
program.
You can also use the [–] [+] buttons to switch user programs.
Selecting from another bank
2. Use the [
K
] [
J
] buttons to select the bank of the user
program that you want to recall.
3. Press a right hand register button to select a user
program.
You can also use the [–] [+] buttons to switch user programs.
MEMO
To return from the state of selecting a user program to the
normal state, press the [USER PROGRAM] button once again.
The “USER PROGRAM” indicator below the display goes
dark.
At this time, the lower line of the display indicates “ WA .”
If you re-select the accordion set, this changes to the selected
set number.
Export and Import User Programs to/from the Optional
USB Flash Drive
The FR-4x allows you to Export or Import User Programs to/from a
USB flash drive.
These functions can be useful either to back-up your User Program
data or to share your User Program with other musicians.
Export User Programs to the Optional USB Flash Drive
1. Connect your USB flash drive (sold separately) to the
FR-4x’s USB MEMORY port.
2. Press the [MENU] button.
3. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button (p. 44).
4. Use the [
K
] [
J
] buttons to select “Export,” and then
press the [ENTER/YES] button.
5. Press the [ENTER/YES] button.
The Export settings screen appears.
6. Use the [–] [+] to set Type to “UPG.”
7. Press the [
J
] button to access the “UPG File” setting
screen.
8. Use the [–] [+] buttons to specify the UPG File.
Choose from the values in the table below.
Parameter/
Display
Value Explanation
UPG File
ALL
Select “ALL” to export All User
Programs.
Bank
Select “Bank” to export all User
Programs of the selected bank.
Single
Select “Single” to export the
single User Program.
If you selected “ALL”
a. Proceed to step 9.
To Next Page
Loading...
