Roland FR-4X - Returning Parameter Values to the Saved State (Restore)

93
Menu Options
Parameter Explanation/Value
Value
(if “Type” is selected as GRWL)
Classic2
Studio
Tradition
Steierische
Trikitixa
F-Jazz
Classic3
Bajan
Value
(if “Type” is selected as G.LV)
It allows you to specify how prominent
the reed growl should be.
Off, –40–Std–+40
7. Use the [–] [+] buttons to set the “Value.”
8. From the Value screen, press the [
J
] button again.
A confirmation message appears.
9. To save the settings, press the [ENTER/YES] button.
When saving is completed, the screen indicates “Complete.”
If you decide to cancel, press the [EXIT/NO] button.
Returning Parameter Values to the Saved State (Restore)
This function allows you to undo all or some changes you made
after last saving your settings by reloading the last version you
saved. This is called “restore.” This can be handy when it turns out
that your changes don’t yield the expected result and that starting
all over again would be quicker than changing the parameters
back.
NOTE
This function does not necessarily load the factory settings: it
loads the settings stored in the selected memory area(s).
1. Press the [MENU] button.
2. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button (p. 44).
3. Use the [
K
] [
J
] buttons to select “Restore,” and then
press the [ENTER/YES] button.
4. Use the [–] [+] buttons to select the parameter
whose value you want to restore.
Type Explanation
ALL
ALL
Restores all of the FR-4x settings.
Master Tune
M.TUN (Master Tune)
Restores the last “M. Tuning” (p. 75)
setting you saved.
Scale Tune
S.TUN (Scale Tune)
Restores the last “Scale Tune” (p. 75)
setting you saved.
System
SYS
Restores the last “System” (p. 72) setting
you saved.
MIDI
MIDI
Restores the last “MIDI Parameters”
(p. 82).
All Sets
S:ALL
Restores the settings of all Sets and the
registers they contain.
Set 1–100
S:001–S:100
Restores the settings of the selected Set.
5. Press the [
J
] button.
A confirmation message appears.