Roland FR-4X - Import User Programs to the Optional USB Flash Drive

41
Working with User Programs
If you selected “Bank”
a. Press the [
J
] button.
The display indicates Src Bank, allowing you to select the number
of the bank that you want to export.
b. Proceed to step 9.
If you selected “Single”
a. Press the [
J
] button.
The display indicates Src Bank, allowing you to select the number
of the bank from which you want to export.
b. Press the [
J
] button.
The display indicates Src Num, allowing you to select the number
of the user program that you want to export.
c. Proceed to step 9.
9. Press the [
J
] button.
The display shows the following screen.
(cursor is blinking)
10. To enter a name, use the [
K
][
J
] buttons to move
the cursor and use the [–] [+] buttons to select
characters.
For details, refer to “Assigning a Name” (p. 20).
11. Use the [
J
] button to move the cursor to the far
right, and then press the [
J
] button again.
A confirmation message appears.
If you decide to cancel, press the [EXIT/NO] button.
12. Press the [ENTER/YES] button.
Export begins, and a progress indication is displayed.
When export is completed, a message is shown to indicate
completion.
&
If a file of the same name already exists, a message asks whether
you want to overwrite the existing file.
Press the [ENTER/YES] button if you want to overwrite-save the
file.
Press the [EXIT/NO] button if you want to return to the previous
screen.
Import User Programs to the Optional USB Flash Drive
1. Insert the optional USB flash drive that should
contain the data to be imported into the FR-4x USB
port.
2. Press the [MENU] button.
3. Use the [
K
] [
J
] button to select “Utility,” and then
press the [ENTER/YES] button (p. 44).
4. Use the [
K
] [
J
] buttons to select “Import,” and then
press the [ENTER/YES] button.
5. Press the [ENTER/YES] button.
The Import settings screen appears.
6. Use the [–] [+] to set Type to “UPG.”
7. Press the [
J
] button to access the “UPG File” setting
screen.
8. Use the [–] [+] buttons to make the UPG File setting.
Choose from the values in the table below.
Parameter/
Display
Value Explanation
UPG File
ALL
Select “ALL” to import All User
Programs.
NOTE
Selecting this function all User
Programs in the FR-4x internal
memory will be replaced.
Bank
Select “Bank” to import all User
Programs of the selected bank.
Single
Select “Single” to import the
single User Program.