Roland FR-4X - Sustain a Routing; Sustain B Routing

79
Menu Options
Parameter Explanation/Value
Switch 1–6
(Switch 1–6)
“High”:
Sets the keyboard mode
to Zone.
“Low”:
Sets the keyboard mode
to Low.
“Accordion Button”:
The same operation as the
[Accordion] button.
“Organ Button”:
The same operation as the
[Organ] button.
“Orchestra Button”:
The same operation as the
[Orchestra] button.
“Bass & Chrd Button”:
The same operation as the
[Bass & Chrd] button.
“F.Bass Button”:
The same operation as the
[F.Bass] button.
“Orch Chrd/F.Bass
Button”:
The same operation as
the [Orch Chrd/F.Bass]
button.
“Orch Bass Button”:
The same operation as the
[Orch Bass] button.
“Octave Up”:
Shift the right hand current
part by +1 octave.
“Octave Down”:
Shift the right hand current
part by -1 octave.
“Octave UpDown”:
Shifts the right hand
current part by +1 octave
only while the button is
operated.
“Octave DownUp”:
Shifts the right hand
current part by -1 octave
only while the button is
operated.
Sustain A Routing
If a function switch or external MIDI foot controller (such as the
FC-300) is assigned to the “SUS.A” (Sustain A routing) function, you
can specify whether each part is controlled.
Parameter Explanation/Value
SusA Orc
(Sustain A Orchestra)
SusA OBs
(Sustain A Orchestra Bass)
SusA OCh
(Sustain A Orchestra Chord)
SusA OFb
(Sustain A Orchestra FBass)
“On”: the relative section is controlled by
the Sustain A routing function.
Off, On
(Default: On)
Off, On
(Default: Off )
Off, On
(Default: Off )
Off, On
(Default: Off )
SusA All
(Sustain A All)
“On”: the all section are controlled by the
Sustain A routing function.
Off, On
Sustain B Routing
If a function switch or external MIDI foot controller (such as the
FC-300) is assigned to the “SUS.B” (Sustain B routing) function, you
can specify whether each part is controlled.
Parameter Explanation/Value
SusB Orc
(Sustain B Orchestra)
SusB OBs
(Sustain B Orchestra Bass)
SusB OCh
(Sustain B Orchestra Chord)
SusB OFb
(Sustain B Orchestra FBass)
“On”: the relative section is controlled by
the Sust.B (Sustain B routing) function.
Off, On
(Default: Off )
Off, On
(Default: On)
Off, On
(Default: On)
Off, On
(Default: On)
SusB All
(Sustain B All)
“On”: the all section are controlled by the
Sust.B (Sustain B routing) function.
Off, On