EasyManua.ls Logo

Roland FR-4X - Left Hand Bass & Chord Part Parameters; Sounds) (Bass Edit)

Roland FR-4X
105 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
Menu Options
Left Hand Bass & Chord Part Parameters (Accordion
Sounds) (Bass Edit)
The parameters of the “BassEdit (Bass Edit)” group are settings for
the left hand bass & chord part (accordion sound).
The parameters can be saved to the selected Set.
&
“Bass and Chord System (BASS & CHRD)” (p. 23)
&
“Selecting Parameters” (p. 44)
NOTE
These parameters cannot be selected if the Free Bass section
is activated.
Introduction to Bass Parameters
These parameters apply to the sound of the register that is
selected for the bass & chord part.
Before you select a parameter and begin editing it, press the LEFT
HAND [BASS & CHORD] button to turn on the bass & chord part,
and then press a left hand register button to select the sound
that you want to edit.
NOTE
The FR-4x internal memory (temporary area) remembers your settings
while the FR-4x is switched on. While editing, there is no absolute need
to save your settings. Be aware, however, that all changes are lost when
the FR-4x is switched off .
See “How to Save a Set” (p. 33) to save your changes.
Also be sure to read “Important Remark About Saving Your
Settings” (p. 45).
Bass parameters
Parameter Explanation/Value
ChrdToBs
(Chord To Bass)
“Off: The reed sound (8’-4’, 4’, 2’) for
chord row does not sound in the bass
row.
“On”: The reed sound (8’-4’, 4’, 2’) for
chord row sounds in the both of the bass
row and the chord row.
Off, On
BtnNsTyp
(Button Noise Type)
On most acoustic accordions, the left
hand part is played using a button
keyboard, and a distinctive noise is heard
when a button is pressed.
Here you can specify the type of that
noise. You can specify a different type of
noise for each sound.
MEMO
If you’ve added expansion sounds, you can
select types other than those listed here.
Bandoneon
I-Folk
I-Folk2
Classic
Cajun
Parameter Explanation/Value
BtnNsTyp
(Button Noise Type)
Jazz
F-Folk
D-Folk
Organetto
F-Folk2
Classic2
Studio
Tradition
Steierische
Trikitixa
F-Jazz
Classic3
Bajan
BtnNs Lv
(Button Noise Level
Specifies the volume of the button noise.
Off, –40–Std–40
RdGrwTyp
(Reed Growl Type)
This parameter allows you to simulate
the typical noise a bass reed makes just
before it stops vibrating altogether.
Each instrument of the accordion family
produces its own typical growl.
MEMO
If you’ve added expansion sounds, you can
select types other than those listed here.
Bandoneon
I-Folk
I-Folk2
Classic
Cajun
Jazz
F-Folk
D-Folk
Organetto
F-Folk2
Classic2

Table of Contents

Other manuals for Roland FR-4X

Related product manuals