Roland FR-4X - Simultaneously Editing the Right Hand Accordion Sounds (Accmacro)

89
Menu Options
Parameter Explanation/Value
SET From
Select the copy-source set.
1–100, WA (Working Area
Set)
REG From
(Register From)
Select the copy-source register
(register button) number.
When the Type is
Accordion, Orchestra, or
Organ
1–14
When the Type is Bass/
Chord, Free Bass,
Orchestra Bass, Orchestra
Chord, or Orchestra Free
Bass
1–7
SET To
Select the copy-destination set.
1–100, WA (Working Area
Set)
REG To
(Register To)
Select the copy-destination register
(register button) number.
When the Type is
Accordion, Orchestra, or
Organ
1–14
When the Type is Bass/
Chord, Free Bass,
Orchestra Bass, Orchestra
Chord, or Orchestra Free
Bass
1–7
5. From the REG To screen, press the [
J
] button again.
A confirmation message appears.
6. Press the [ENTER/YES] button to copy the settings.
A message briefly indicates that data is being written, and then
indicates “Complete” when copying is complete.
&
If you decide to cancel, press the [EXIT/NO] button.
Simultaneously Editing the Right Hand Accordion Sounds
(AccMacro)
This parameter allows you to change the settings of the Right Hand
register (Treble) in the current SET.
This may help you save a lot of time, especially for increasing or
decreasing the volume of some or all reeds, or for selecting a
different noise type.
1. Select the set for which you want to edit the right
hand accordion sounds simultaneously.
For details, refer to “How to Select Sets” (p. 33).
2. Press the [MENU] button.
3. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button (p. 44).
4. Use the [
K
] [
J
] buttons to select “AccMacro,” and
then press the [ENTER/YES] button.
5. Use the [–] [+] buttons to select the type of
parameter that you want to edit in common for
registers 1–14 of the right hand accordion part.
Parameter Value
Type
Valve Noise Type
Valve Noise Level
Musette Detune Type
6. Press the [
J
] button.
The Value screen appears.
The field “Value” changes depending on the “Type” of selected
parameter. See the following table:
Parameter Explanation/Value
Value
(if “Type” is selected as NOIS)
It allows you to specify what kind of
instrument should generate the noise.
MEMO
If you’ve added expansion sounds, you can
select types other than those listed here.
Bandoneon
I-Folk
I-Folk2
Classic
Cajun
Jazz
F-Folk
D-Folk
Organetto
F-Folk2
Classic2
Studio
Tradition
Steierische
OldItaly