Roland FR-4X - Basic Operation of the FR-4 X; Explanation of Operations in the Main Screen; Main Screen

18
Basic Operation of the FR-4x
Explanation of Operations in the Main Screen
This section introduces the information that appear on the main page in FR-4x’s display and how to navigate the menu.
Main Screen
The main screen shows the following information.
Right hand part status indication
The right-hand current part (This indicates the sound part that changes when you press a right-hand register button).
5 (Blank): Accordion (Treble) Part
5 o: Orchestra Part
5 r: Organ Part
Register number selected by the right hand current part
Left hand part status indication
5 The numbers in the BASS area and CHRD area of the illustration indicate the register number of each
left hand part.
5 If no “o” symbol is shown in the BASS area or CHORD area as in the illustration, and the same register
number is shown, the left hand current part (the part that is selected when the left hand register
button is pressed) indicates the bass & chord part or the free bass part.
5 If an “o” symbol is shown in the CHRD area as in the illustration, this indicates that this is the register
number of the orchestra chord part or the orchestra free bass part.
5 If an “o” symbol is shown in the BASS area as in the illustration, this indicates that this is the register
number of the orchestra bass part.
5 The register of the part for the left hand orchestra can be selected separately for the chord rows
(orchestra chord part / orchestra free bass part) and for the bass rows (orchestra bass part).
In this case, the register number shown in bold characters beside the “o” symbol is the left hand
current part.
CHRD areaBASS area
The left hand current part’s register number is shown in bold characters
MEMO
If the [BASS&CHRD] button is lit or blinking, bass & chord mode is selected. If the [F.BASS] button is lit or blinking, free bass mode is
selected.
Others
5 If the “
K
” or “
J
” symbol is shown, this means that you can use the [
K
] [
J
] buttons to move between
screens.
You can check or change the sound of each part in the move-destination screen.
&
“Changing the sounds assigned to the buttons” (p. 21)
&
“Using the [
K
][
J
] buttons to move between pages in the main screen” (p. 19)
5 The selected set number.
Use [–] [+] to select a set.
5 This indicates that the set has been edited but not saved.
For details on saving your changes, refer to “How to Save a Set” (p. 33).
You should also carefully read “Important Remark About Saving Your Settings” (p. 45).