35
Using Sets
Export and Import Sets to/from the Optional USB Flash
Drive
The FR-4x allows you to Export or Import Sets to/from a USB flash
drive. These functions can be useful either to back-up your Sets or
to share your Set with other musicians.
Export Sets to the Optional USB Flash Drive
1. Insert the optional USB flash drive into the FR-4x
USB port.
2. In the main screen, press the [MENU] button.
3. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button.
4. Use the [
K
] [
J
] buttons to select “Export," and then
press the [ENTER/YES] button.
5. Press the [ENTER/YES] button.
The screen for Export settings appears.
6. If the Type setting is other than “ S E T,” use the [–] [+]
buttons to change Type to “ S E T.”
7. Press the [
J
] button to access the “SET File” screen.
8. Use the [–] [+] buttons to specify SET File.
Choose from the values in the table below.
Parameter/
Display
Value Explanation
SET File
All
Select “ALL” to export All Sets.
Also the system parameters will
be exported together.
Single
Select “Single” to export the
single Set.
If you selected “ALL”
a. Continue to the step 9.
If you selected “Single”
a. Use the [
K
] [
J
] buttons and the [–] [+] buttons to
select “Src SET” and specify the set number that you
want to export.
b. Continue to the step 9
9. Press the [
J
] button.
The display shows the following screen:
(cursor is blinking)
10. To enter the name, use the [
K
] [
J
] buttons to move
the cursor and use the [–] [+] buttons to select a
character.
&
“Assigning a Name” (p. 20)
11. Use the [
J
] button to move the cursor to the far
right, and then press the [
J
] button again.
A confirmation message appears.
If you decide to cancel, press the [EXIT/NO] button.
12. Press the [ENTER/YES] button to export the set.
Export begins, and a screen indicating the export progress appears.
When export is completed, the screen indicates “Complete.”
&
If a file of the same name already exists, you are asked whether you
want to overwrite it.
Press the [ENTER/YES] button if you want to overwrite-save the
file.
Press the [EXIT/NO] button if you want to return to the previous
screen.
Import Sets to the Optional USB Flash Drive
1. Insert the optional USB flash drive that should
contain the data to be imported into the FR-4x USB
port.
2. In the main screen, press the [MENU] button.
3. Use the [
K
] [
J
] buttons to select “Utility,” and then
press the [ENTER/YES] button.
4. Use the [
K
] [
J
] buttons to select “Import,” and then
press the [ENTER/YES] button.
5. Press the [ENTER/YES] button.
The screen for Import settings appears.
6. If the Type setting is other than “ S E T,” use the [–] [+]
buttons to change Type to “ S E T.”
To Next Page
Loading...
