Roland FR-4X - Page 34

34
Using Sets
The parameter groups of a set are listed below.
Parameter/
Display
Value Explanation
Common
NO, YES
Select “ Yes ” to save the Common
Group parameters (p. 70).
Default: “ Yes”
MEMO
This also includes the Drum Edit
and Right Hand Mode settings.
Accordion
NO, ALL,
1–14
Allows you to save the Accordion
registers.
5 “No”: The Accordion registers are
not saved.
5 “All”: Save all registers (1–14).
(Default).
5 “1–14”: Save the selected
register.
Bass
NO, ALL,
1–7
Allows you to save the Bass
registers.
5 “No”: The Bass registers are not
saved.
5 “All”: Save all registers (1–7).
(Default).
5 “1–7”: Save the selected register.
Free Bass
NO, ALL,
1–7
Allows you to save the Free Bass
registers.
5 “No”: The Free Bass registers are
not saved.
5 “All”: Save all registers (1–7).
(Default).
5 “1–7”: Save the selected register.
Orch/Organ
NO, ALL,
1–14
Allows you to save the Orchestra
/ Organ registers.
5 “No”: The Orchestra / Organ
registers are not saved.
5 “All”: Save all
Orchestra / Organ
registers
(Contents of right hand registers
1–14 for the orchestra part and
for the organ part) (Default).
5 “1–14”: Save the selected
register.
Orchestra
Bass
NO, ALL,
1–7
Allows you to save the Orch. Bass
registers.
5 “No”: The Orch. Bass registers are
not saved.
5 “All”: Save all registers (1–7).
(Default).
5 “1–7”: Save the selected register.
Orchestra
Chord
NO, ALL,
1–7
Allows you to save the Orch.
Chord registers.
5 “No”: The Orch. Chord registers
are not saved.
5 “All”: Save all registers (1–7).
(Default).
5 “1–7”: Save the selected register.
Parameter/
Display
Value Explanation
Orchestra
FBass
NO, ALL,
1–7
Allows you to save the Orch.
FBass registers.
5 “No”: The Orch. FBass registers
are not saved.
5 “All”: Save all registers (1–7).
(Default).
5 “1–7”: Save the selected register.
9. Use the [
K
][
J
] buttons to access the “O.F. Bass
(Orchestra FBass)” parameter, and then press the
[
J
] button.
A confirmation message appears.
10. Press the [ENTER/YES] button to save the settings.
&
If you decide to cancel, press the [EXIT/NO] button.